Gravel Calculator

What is the Gravel Calculator?

Estimate gravel volume and weight in tons for driveways and paths. Gravel is usually sold by the ton but measured by volume, so converting area and depth into tons helps you order the right amount.

How to use the Gravel Calculator

1. Enter your length, your width, your depth, your density.
2. Results update automatically as you type; you can also press Calculate.
3. Read the output: cubic yards, weight.
4. Use the 📊 chart to see the result visually, then copy or share it.

Formula and method

Worked example

With length = 30 ft, width = 10 ft, depth = 4 in, density = 1.4 tons/yd³, the Gravel Calculator returns cubic yards: 3.70; weight: 5.19 tons.

Where the Gravel Calculator helps in real life

You are laying a 50 × 10 ft driveway 4 inches deep. The calculator gives the volume and approximate weight in tons for your supplier.

You are adding a gravel path through the garden. Calculating the tons needed tells you whether a few bags or a bulk delivery makes more sense.

Common mistakes to avoid

• Using a generic density when your gravel type is heavier or lighter.
• Forgetting that gravel compacts after spreading.
• Entering depth in feet instead of inches.
• Ordering one layer when the job needs a base and a top layer.

💡 Practical tip: Different gravel types weigh different amounts — ask your supplier for the density before ordering.

Tips for better results

• Ask your supplier for the density of the exact product.
• Add extra for compaction on driveways.
• Install landscape fabric underneath to reduce weeds.

⚠️ Material estimates are approximate. Follow local building codes and manufacturer instructions.

Related tools